As the designer and manufacturer of the world's very
first automotive sealed door module in 1968, ArvinMeritor has an
unparalleled level of experience in modular solutions for passenger
vehicles.
The range of products encompasses:
The company designs and delivers over 4 million full
door modules in a single year, and proudly makes advances with
synergy developments such as the innovative Power Tailgate System.
 |
Glass Motion Module
A revolutionary integrated module that reduces the parts and tooling numbers required to supply a complete platform range with a high level of standardization in both components and processes. Pre-tested module gives superior glass alignment and guidance, increased sealing performance and reduced wind noise/BSR. The design increases occupant elbow room facilitating possible safety improvements while also reducing weight.
Shown here partially inserted in the door.
|
 |
Glass Motion Module
A revolutionary integrated module that reduces the parts and tooling numbers required to supply a complete platform range with a high level of standardization in both components and processes. Pre-tested module gives superior glass alignment and guidance, increased sealing performance and reduced wind noise/BSR. The design increases occupant elbow room facilitating possible safety improvements while also reducing weight.
Shown here partially inserted in a transparent door.
|
 |
Glass Motion Module
A revolutionary integrated module that reduces the parts and tooling numbers required to supply a complete platform range with a high level of standardization in both components and processes. Pre-tested module gives superior glass alignment and guidance, increased sealing performance and reduced wind noise/BSR. The design increases occupant elbow room facilitating possible safety improvements while also reducing weight.
Shown here fully inserted in the door.
|
 |
Glass Motion Module (Inside View)
A revolutionary integrated module that reduces the parts and tooling numbers required to supply a complete platform range with a high level of standardization in both components and processes. Pre-tested module gives superior glass alignment and guidance, increased sealing performance and reduced wind noise/BSR. The design increases occupant elbow room facilitating possible safety improvements while also reducing weight.
|
 |
Glass Motion Module (Outside View)
A revolutionary integrated module that reduces the parts and tooling numbers required to supply a complete platform range with a high level of standardization in both components and processes. Pre-tested module gives superior glass alignment and guidance, increased sealing performance and reduced wind noise/BSR. The design increases occupant elbow room facilitating possible safety improvements while also reducing weight.
|
 |
Hardware Door Module (Inside View)
With a steel carrier and sealed wet and dry areas, this module eliminates the need for a water barrier while also integrating key components such as the window regulator, motor, latch and outer handle support. In production since 1997.
|
 |
Hardware Door Module (Outside View)
With a steel carrier and sealed wet and dry areas, this module eliminates the need for a water barrier while also integrating key components such as the window regulator, motor, latch and outer handle support. In production since 1997.
|
 |
Highly Integrated Plastic Module (Inside View)
With a high strength plastic composite carrier and sealed wet and dry areas, this module eliminates the need for a water barrier while also integrating all attachments up the window regulator guide rails.
|
 |
Highly Integrated Plastic Module (Outside View)
With a high strength plastic composite carrier and sealed wet and dry areas, this module eliminates the need for a water barrier while also integrating all attachments up the window regulator guide rails.
|
 |
Offset Trim Door Module
The trim sub-module and the mechanical sub-module are temporarily fastened together to facilitate line delivery. First, the mechanical sub-module is attached to the door, and then the two sub-modules are separated for the trim sub-module to be assembled on top.
|
 |
Offset-Trim Door Module (Glass Motion Semi-Module)
The “H” layout eases packaging of other components in the door.
|
 |
Offset-Trim Door Module (Installed)
To facilitate line-side delivery, the trim sub-module and the mechanical sub-module are temporarily fastened together but in an offset manner. This allows the mechanical sub-module to be attached to the door first, and then for the two sub-modules to be separated and the trim sub-module finally assembled on top.
|
 |
Offset-Trim Door Module (Installed)
To facilitate line-side delivery, the trim sub-module and the mechanical sub-module are temporarily fastened together but in an offset manner. This allows the mechanical sub-module to be attached to the door first, and then for the two sub-modules to be separated and the trim sub-module finally assembled on top.
|
 |
Offset-Trim Door Module (Outside View)
To facilitate line-side delivery, the trim sub-module and the mechanical sub-module are temporarily fastened together but in an offset manner. This allows the mechanical sub-module to be attached to the door first, and then for the two sub-modules to be separated and the trim sub-module finally assembled on top.
|
 |
Offset-Trim Door Module (Ready for Installation – Inside View)
To facilitate line-side delivery, the trim sub-module and the mechanical sub-module are temporarily fastened together but in an offset manner. This allows the mechanical sub-module to be attached to the door first, and then for the two sub-modules to be separated and the trim sub-module finally assembled on top.
|
 |
Offset-Trim Door Module (Ready for Installation – Outside View)
To facilitate line-side delivery, the trim sub-module and the mechanical sub-module are temporarily fastened together but in an offset manner. This allows the mechanical sub-module to be attached to the door first, and then for the two sub-modules to be separated and the trim sub-module finally assembled on top.
|
 |
Offset-Trim Door Module (Trim Only)
To facilitate line-side delivery, the trim sub-module and the mechanical sub-module are temporarily fastened together but in an offset manner. This allows the mechanical sub-module to be attached to the door first, and then for the two sub-modules to be separated and the trim sub-module finally assembled on top.
|
 |
Powered Tailgate System
A system that gives cost-effective powered operation to vehicle tailgates via a gas spring driven by a push-pull cable with electronic control module.
|
 |
Powered Tailgate System (Shown Opening)
A system that gives cost-effective powered operation to vehicle tailgates via a gas spring driven by a push-pull cable with electronic control module.
|
 |
Quarter Window Door Module for Convertibles (with Glass)
This module facilitates complex glass movement for convertible vehicles. Various models are currently in production featuring a high stroke-to-size ratio – the result of a unique, patented design. Also available as vertical plug-in through the body waist coating.
|
 |
Quarter Window Module for Convertibles
This module facilitates complex glass movement for convertible vehicles. Various models are currently in production featuring a high stroke-to-size ratio – the result of a unique, patented design. Also available as vertical plug-in through the body waist coating.
|
 |
Vision Door (Inside View)
A revolutionary system whereby all components are assembled from the outside of the door. In production since mid-2003, ArvinMeritor is the only supplier in the world experienced in assembling and handling complete painted doors for a high-volume OEM.
|
 |
Vision Door (Outside View with Anti-Intrusion Bar, Outer Skin Not Shown)
A revolutionary system whereby all components are assembled from the outside of the door. In production since mid-2003, ArvinMeritor is the only supplier in the world experienced in assembling and handling complete painted doors for a high-volume OEM.
|
 |
Vision Door (Outside View, Anti-Intrusion Bar and Outer Skin Not Shown)
A revolutionary system whereby all components are assembled from the outside of the door. In production since mid-2003, ArvinMeritor is the only supplier in the world experienced in assembling and handling complete painted doors for a high-volume OEM.
|
